48" x 96" Stencil Material SKU: 0616-096
Every once in a while you may have to cut your own stencils, and that is why we now offer this 48 by 96 inch stencil plastic for purchase. These sheets are perfect for random stencils that need to be matched in the field. Typically we see contractors keeping a few sheets in their trailer/truck so that if they pull up to a job that has a bunch of the same marking, they can cut it on-site with a utility knife. All 1-800-Stencil’s are professional quality and made from either Light or Pro-Grade LDPE, Aluminum, or optional UHMW plastic to all last for years of professional use.
- Perfect to make your own stencils
- Full size 48"x96" sheet
- Offered in 3 material grades
Specifications
| Material Width | 96" |
| Material Height | 48" |
| Availability | In Stock - Ships Same Day* |
Country of origin: USA
Warranty: Our stencils are guaranteed to be free of defects that will impede the use of the product.
Customer Questions and Answers
Q: How can I cut this material for my own custom stencils?
A: The 1/8" LDPE is best cut with a jigsaw or handheld router (like a rotozip tool). The 1/16" LDPE and 1/32" PVC are cut very easily with a utility knife.
Q: What is the best way to copy the stencil I need?
A: Since the LDPE material is translucent, the best way is to place the material over top of the old marking or stencil then trace it with a permanent marker. You can then use a knife or router to cut them out.
Other Part Numbers
Selecting a Stencil Grade:
- 1/8" (.125”) LDPE - PRO-Grade, our most common material, typically can be used thousands of times, and with proper care, they can last for many years. Lays Flat, and heavy enough to stay put while spraying up to 3000psi.
- 1/16" (.063”) LDPE - What we call Light-Duty, this material is just as durable as its 1/8" counterpart, however, it is half the thickness and can be flimsy. We recommend this for stencils that aren't used every day.
- 5/64” (.080”) ALUM - Aluminum can last almost forever, you can reuse it and abuse it. It will be ready to work today and in 10 years. The ridged 5052 Aluminum we use is also perfect for thermoplastic extruding, saving hundreds of Dollars per Legend. Shown here in .080” thickness, but it is also available in .190” (6061) which is harder, thicker, and stronger.
- 1/4” (.025”) UHMW – Preferred by municipalities for its superior strength, it can be loaded with many coats of paint and remain rigid without sagging. Ultra-High-Molecular-Weight Polyethylene is highly resistant to corrosive chemicals and highly resistant to abrasion. Shown here in 1/4” thickness, but also available in 3/8” or 1/2” versions.
